Last Updated： Aggregation Period:Sep 24, 2025～Oct 21, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 24, 2025～Oct 21, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 24, 2025～Oct 21, 2025
This ranking is based on the number of page views on our site.
1～15 item / All 88 items
Equipped with a USB connection terminal. A position control unit that is easy to connect to a PC.
Digital position control unit capable of driving DC motors and brushless DC motors with incremental encoders.
Grundfos pump. It is a constant pressure operation unit using a 3-inch deep well submersible pump SQE.
The deep well submersible pump constant pressure control unit SQEP is a constant pressure operation unit that uses a 3-inch deep well submersible pump SQE. It is designed with a 3-inch size for ease of handling, and its weight is about half that of conventional models, providing overwhelming advantages during installation and maintenance work. The CU301 control box is built into the above-ground unit, allowing for one-touch pressure settings in 0.5 bar increments from 1.5 to 4.5 bar, ensuring constant pressure water supply regardless of changes in well water levels. BC materials are used for the piping to shut out red water, and a pressure reducing valve is unnecessary even for wells with shallow natural water levels.
CC-Link dedicated panel-mounted indicator
It is a panel-mounted indicator specialized for CC-Link output, allowing control and calibration operations of measuring instruments through touch panel operations. With high-speed sampling at 500 times per second, it is capable of outputting comparative and sequential outputs with high response for up to 5 points.
Enhance the reliability of the alarm contact output for the control and shutdown of the seismometer.
Multi-Control Unit (2 out of 3) CU-5 is a device designed to enhance the reliability of alarm contact outputs for control and shutdown of seismometers, featuring a 2 out of 3 circuit for each of the up to 5 alarm levels. In each 2 out of 3 circuit, an alarm signal is output when 2 or more points out of 3 are activated. For more details, please download the catalog or contact us.
Controllers from Mitsubishi, Omron, and Keyence that connect to 100base Ethernet with sequencers and Windows PCs.
When it comes to motion control modules, they are typically something that attaches neatly next to the sequencer CPU unit. However, we have developed a motion control module that connects via cable from the LAN port of the sequencer's CPU unit. It's called "InterMotion." "InterMotion" connects via LAN to the CPU units of Mitsubishi PLCs, Omron PLCs, and Keyence PLCs. Additionally, it can control a total of 16 axes of Panasonic's high-speed communication, low-wiring servo "RealtimeExpress" series A5N and A4N. Until now, it was common knowledge that Mitsubishi PLCs used SSC-NET servos, Omron PLCs used Mechatrolink or EtherCAT servos, and Keyence PLCs used Mechatrolink servos. However, from the moment you read this article, that is no longer the norm in the industry. Panasonic's RTEX servos can also be used. Please consider getting comparative quotes. The motion control module "InterMotion," which can connect to various PLCs, will contribute to reducing the costs of your machinery.
When a collision occurs, the stop signal is activated within 1 ms! It minimizes damage as much as possible.
"GEMCMS" is a highly efficient tool designed to minimize damage caused by collisions. It reduces crash detection time to under 1ms, allowing for valuable time savings and enabling the execution of stop commands in an even shorter time. Additionally, special sensors detect any slight μ-range distortions within the machine structure caused by forces acting on each axis of the spindle. [Features] ■ Minimizes subsequent damage due to programming, setup, and operational errors ■ Reaction time is under 1ms, faster than any NC overload device ■ Capable of detecting both severe collisions and non-impact (quasi-static) collisions ■ Extends machine lifespan ■ Increases machine operating rate *For more details, please refer to the PDF document or feel free to contact us.
A module that controls the charging of smart batteries and manages charging and discharging! Balancing safety and sustainability.
We would like to introduce the 'RRC-PMM20' that we handle. Compared to the 'RRC-PMM240', it features improvements in total input voltage, input current, and total output power, as well as optimized battery charging. Additionally, the standby current has been significantly reduced from 1.00mA to 200μA, enhancing energy efficiency and complying with numerous international standards. 【Features】 ■ Wide input voltage range: 7.5V to 24VDC ■ Input protection: reverse connection, short circuit, overvoltage, overcurrent, 12A fuse ■ Compatible with all POWERPAQ products and batteries compliant with smart battery systems ■ Test report certification in accordance with IEC60601-1 (3rd edition), IEC60601-1 (3rd edition) Amendment 1, and IEC62368-1 *For more details, please download the PDF (English version) or feel free to contact us.
The TCU is an IC temperature control unit with cooling functionality, providing high-performance temperature management/control from low to high temperatures.
The Thermal Control Unit (TCU) is used to control the temperature of ICs during performance testing. The TCU is an IC temperature management solution that can be used for various applications such as IC characterization, validation, manufacturing, or system-level testing.
Up to 5A output × abundant I/O × PID control for flexible control of voice coil drive.
It is a high-performance motion controller that precisely controls the operation of voice coil actuators. Equipped with a servo control cycle of up to 20kHz and PID control, it achieves fine positioning and speed control. It provides a maximum output current of 5A and operates within a range of 24 to 48V. It supports a variety of interfaces (TCP/IP, USB) and can be controlled using common programming environments such as LabVIEW, MATLAB, and Python. Additionally, it features an auto-zero function with automatic adjustment capabilities and a built-in data recorder function, making it easy to record operational data. Its compact and lightweight design makes it ideal for integration into OEM equipment and for research and development purposes.
Tarm Control Unit UT-200 Model
This product is a device that outputs volume values based on the sag of electric wires and performs rotational control for inverters and the like. It can be used with existing wire winding machines and wire supply machines. Custom manufacturing is also possible within the user's specified application range.
2-axis motor driver built-in PIC microcontroller unit
This is a general-purpose PIC microcontroller control unit equipped with a PIC microcontroller that is ideal for embedded applications and prototyping. It includes a dual-axis stepping motor driver, allowing users to develop programs for various applications such as transport and positioning control. Additionally, it is equipped with common external input/output interfaces, enabling flexible and wide-ranging support for prototyping and small-lot products. It also features an LCD display, light-emitting diodes, and push-button switches, facilitating the construction of a certain level of man-machine interface.
Dimming control of monochrome LEDs and full-color LEDs allows for dimming from 0 to 100%.
● Constant current setting with 24CH output ● MAX current setting is possible regardless of the number of loads, and DMX control is also available.
![[Instruction Manual] Telephone Line Control Unit TK-1660A/1660AV](https://image.mono.ipros.com/public/product/image/85c/2000555023/IPROS50794475476037196421.png?w=280&h=280)
Introducing an automatic incoming and outgoing call network control unit that connects to telephone lines for voice and data exchange.
This document is a common manual for the telephone line control unit "TK-1660A/1660AV." This product is equipped with a DSP, achieving high cost performance. It supports outgoing phone number reception (caller ID) and enables automatic incoming call identification. Additionally, with the built-in voice recording and playback function (AV only), voice announcements are possible during automatic calls. [Contents (partial)] ■1 Overview ■2 Features ■3 Accessories ■4 Specifications ■5 Applications of main components, etc. *For more details, please refer to the PDF document or feel free to contact us.
We provide a comprehensive service from product planning, development, and design to parts procurement and manufacturing.
We are developing control units for building automation (BA) using LonWORKS technology in a decentralized control system. Our company has developed a lighting controller compatible with LonWORKS. We also engage in the development of products that apply LonWORKS technology. For more details, please contact us.
